The infrared measurement gives improved reliability and measures gas in two different wavelengths: one that absorbs gas and the other does not. With little chance of being poisoned, the Gas-Pro IR is inherently safer and saves the need of regular and expensive pellistor replacement when used in likely contaminated environments.
The Gas-Pro Range is known for its simple use and functionality as well as easy testing and calibration. The Gas-Pro IR now completes the Gas-Pro range and gives greater flexibility for sensor selection in this 5-gas multigas detector.User Friendly
The Gasman full function personal single gas monitor is compact and lightweight yet is fully ruggedised for the toughest of industrial environments.
Featuring simple single button operation, it has a large easy to read display of gas concentration, and audible, visual and vibrating alarms.
Today's TriplePlus+ builds on this pedigree by inclusion of unique LIBRA lithium-ion battery technology and the option of infrared (IR) sensors for the measurement of flammable hydrocarbons or carbon dioxide.Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.
|Display Type||Digital, Analog|
Now supported by the Crowcon C-Test which provides bump testing, event management and calibration from a simple to use wall mount station and gives fleet or safety managers the ability to update configurations on large fleets. It also maintains the all important event logs that demonstrate users are working within the company requirements. See datasheet for more info.
|Display Type||Digital, Analog|
Detective Wireless uses the proven RICOCHET mesh network. When establishing a mesh network, Detective Wireless automatically selects the best line to give strongest interconnections. Should wireless connection between two devices weaken, the network will ‘self-heal’ and automatically re-route communications via alternate RICOCHET enabled devices, creating a mesh type network that provides a more robust and efficient wireless network.When Detective+ goes into alarm, the signal will be sent to other units alerting the user to gas being present in the area. If the signal is weak due to heavy metal work being present the Detective Wireless can be used as a repeater to boost the signal between units. In a confined space the unit can use up to 20 metres of cable to position the unit in a location that will increase signal.
Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user focused features.
An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modesUser Friendly
The Laser Methane mini (LMm) is an innovative long-range portable detector which allows methane gas to be detected from a distance of up to 100m. This enables easy access to hard-to-reach locations, such as elevated piping or locked premises, and helps keep the operator away from potential leak sources.Overview:
Laser Methane mini (LMm) is a compact handheld detector that can detect methane gas from a safe distance. Utilising infrared laser technology, methane leaks can be quickly confirmed by pointing the laser beam towards the suspected leak, or along the survey line. This revolutionary technology removes the need to access elevated places, under floor or other hard to reach areas. It is also ideal for surveying large open spaces e.g. landfills or along pipelines.User friendly:
Offering you compliance, robustness and low cost of ownership in a simple to use solution. The large single button and intuitive menu system allows T4 to be operated wearing gloves with minimal training.
Crowcon's toughest portable yet, T4 is durable by design and includes an integrated rubber boot as standard. An optional clip-on filter cover, which is easily removed and replaced, ensures sensors are protected in the dirtiest environments. Drop tested to 4m and well protected from water ingress through IP65 and IP67 certification, T4 allows uninterrupted working in the most demanding environments.
Now with improved detection of pentane, hexane and other long chain hydrocarbons.
T4 contains a wide range of powerful features to make everyday use easier and safer:TWA Resume
Unique to T4, the TWA Resume function ensures toxic gas exposure is calculated accurately over an entire shift, even if T4 is switched off for a break or during travel to another site.
When most portable detectors are turned off, the algorithm that assesses TWA exposure assumes that it’s the end of the shift. When turned on again, these detectors act as if it is a new work shift, ignoring all previous measurements. The TWA Resume function however, provides the option to include previous measurements from within the correct time frame.18 hour battery
With a battery life of 18 hours, T4 allows multiple or longer shifts to be worked between recharging.Positive Safety
Crowcon's visual 'traffic light' indication, provides constant visual assurance that T4 is operating soundly and conforms to site bump test calibration policy. The bright green and red Positive Safety LEDs are visible to all and offer a quick, simple and comprehensive indication of monitor status to both the user and others around them.Accessories
T4 is complemented by a range of accessories including:
Tank-Pro integrates innovative safety features and an intuitive, rugged design to provide advanced protections for those working in harsh environments. This portable multigas detector, which is exceptionally easy to use and service, protects against the four most prevalent gas hazards: carbon monoxide (CO), hydrogen sulphide (H2S), flammable gases and oxygen (O2) depletion.How Tank-Pro is different to your standard gas detector
Tank-Pro is a gas detection unit for use in specialist environments where standard gas detectors just won't work. One common hydrocarbon detection method is pellistor sensors. However, these sensors require the presence of oxygen to work, and if hydrocarbon levels get too high the can compromise the sensors' effectivess.
Tank-Pro meets these unique challenges with its dual infra-red sensors and ability to check tanks both full of hydrocarbon and fully purged.Detecting the danger with dual infra-red
Tank-Pro employs the best sensor technology to reliably monitor confined spaces - dual infra-red (IR). IR sensors are not inhibited by high hydrocarbon concentrations and don't require oxygen to work. Unlike single IR sensors, the dual nature of this sensor enables it to cope with gas in high %vol as well as %LEL concentration. An integrated pump quickly draws samples from lines up to 30 metres long, so tanks can be checked quickly - ideal when the atmosphere that needs sampling is a long walk or climb away.
Tank-Pro is Crowcon's personal protection solution for detecting the four most common gas hazards:
Tank-Pro weights just 340g, making it one of the lightest tank-checking products on the market. It’s light enough to be clipped to a belt or overalls, and can also be carried over the shoulder.
Well protected from water ingress through IP65 and IP67 certification, Tank-Pro allows uninterrupted working in the most demanding environments.
Tank-Pro contains a wide range of powerful features to make everyday use easier and safer:
13 hour battery
With a battery life of 13 hours, Tank-Pro allows longer shifts to be worked between recharging.
Safety at a glance
A bright, clear top mount display makes it easy to read at a glance.
Large single button and intuitive menu system minimise training and allow easy operation while wearing gloves.
Bright red and blue LEDS, a 95 decibel alarm, and vibrating alerts provide clear and effective warning to gas hazards.
Tank-Pro is complemented by a range of accessories including:
|Minimum Order Quantity||1 Unit|
Gases include the most common four (carbon monoxide, methane, oxygen and hydrogen sulphide), but also an expanded range: ammonia, ozone, sulphur dioxide, H2 filtered CO (for steel plants) and IR carbon dioxide (for safe area use only).Robust