Realix Industries Private Limited
Realix Industries Private Limited
Kapurbawdi Naka, Thane, Maharashtra
SEND SMS
SEND EMAIL

Fixed Gas Detector

We are a leading Manufacturer of crowcon f-gas detector, x gard gas detectors, flamgard plus, irmax gas detectors, txgard plus flammable gas detector and txgard-is gas detectors from Thane, India.

Crowcon F-Gas Detector

Crowcon F-Gas Detector
  • Crowcon F-Gas Detector
Ask For Price

Housed within an IP54 rugged enclosure, the F-Gas Detector is suitable for use in non-hazardous areas such as plant or switchgear rooms. 

In addition to protecting personnel from toxic gas risks, installing the F-Gas detector also helps to reduce the risk of leakage of powerful 'greenhouse gases' into the environment.

Accurate and reliable
  • Superior IR sensor technology - provides fast, stable and dependable performance with low maintenance and long life. Unlike cheaper semi-conductor type sensors the F-Gas detector is not affected by other types of gas or changes in temperature or humidity
Simple and versatile
  • Tri-coloured LED's - indicate the operating status of the detector, and in combination with the function keys, facilitate simple adjustments such as zero and calibration
  • Choice of output signals - the analogue output signal can be set as 4-20mA, 0-20mA, 0-2V, 0-5V or 0-10Vdc for compatibility with virtually any control system
Long life with low maintenance costs
  • No consumable parts - provides many years of service with no requirement to replace the sensor or any other components
  • Simple to test - requires a bi-annual gas check only. Re-calibration is only necessary if readings are out of range
  • IP54 rated enclosure - provides good protection from dust and water ingress in indoor environments
Safety and compliance
  • F-Gas regulations compatible - enables F-Gas suppliers and user to comply with the mandatory European F-Gas regulations
  • Rapid gas leak detection - provides an early warning that gas is leaking and thus maintains system efficiency and reduces expensive gas replacement costs
  • Environmental protection - helps to reduce the risk of leakage of powerful 'greenhouse gases' into the environment

 

Request
Callback
Yes! I am interested

X Gard Gas Detectors

X Gard Gas Detectors
  • X Gard Gas Detectors
  • X Gard Gas Detectors
  • X Gard Gas Detectors
  • X Gard Gas Detectors
  • X Gard Gas Detectors
Ask For Price
The Xgard range is a comprehensive selection of fixed point gas detectors that meet the diverse requirements for gas detection in industries throughout the world. This includes many water treatment, oil and gas, power, research facility and manufacturing installations. Intrinsically Safe (I.S.) or Flameproof (Exd) versions are available, with case options comprising high-grade alloy, stainless steel or chemically resistant GRN polymer. Certifications include IECEx, ATEX, UL, GOST-R and MED.

Features include:

  • Over 30 long life sensor types available, including electrochemical, pellistor, infra-red and thermal conductivity measurement technologies
  • Rugged and reliable, with ingress protection to IP65 as standard
  • IEC61508 SIL 2 compliance demonstrates high integrity design
  • Low cost of ownership, with plug-in sensor modules for quick and simple replacement
  • Flexible installation options, including mA or mV output versions

In addition the Xgard IR model affordably offers the advantages of IR technology:

  • Fail safe sensor technology
  • Immune to poisoning
  • No damage by over-gassing
  • Fast response
  • Does not need oxygen to work
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

FlamGard Plus

FlamGard Plus
  • FlamGard Plus
  • FlamGard Plus
  • FlamGard Plus
  • FlamGard Plus
  • FlamGard Plus
Ask For Price
Flamgard Plus is a Flameproof (Exd) flammable gas detector which uses poison-resistant pellistors to detect explosive levels of hydrocarbons, hydrogen and other flammable gases and vapours, including aviation fuel and leaded petrol vapours.

Non-intrusive calibration
Calibration can be performed locally without the need for hot work permits. Local display and magnetic key enable calibration without opening the junction box.


Flexible output options
A 4-20mA signal is provided and optional alarm and fault relays are available to drive local alarm devices. If required the sensor can be mounted remotely from the display / transmitter enclosure.


Rugged and reliable

Constructed using highly durable marine-grade alloy with a tough polyester coating. Ingress protection to IP65 as standard. Uses long-life poison resistant pellistors.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

IRmax Gas Detectors

IRmax Gas Detectors
  • IRmax Gas Detectors
Ask For Price
IRmax

IRmax is an ultra-compact infrared (IR) gas detector that delivers rapid, fail-safe detection of hydrocarbon gases and vapours. The IRmax gas detection system offers the choice of a detector only, a local gas/status display, a remote gas/status display or non-intrusive calibration via an I.S. calibration tool or hand-held HART communicator.

Overview

The reliability of IRmax has been proven in hot, cold, wet and saline environments, making it ideal for offshore. 
IRmax's unique  optical components are treated with a highly durable coating that completely prevents faults due to condensation. As IRmax contains no components for artificially heating optical surfaces, power consumption is dramatically reduced, requiring only 1W of power.

Simple to install
  • Compact size - requires less space, effort and time to install
  • Various installation options - can be wall mounted, fitted to a 50mm (2 inch) pipe or connected to an auxiliary junction box using a choice of mounting accessories
  • Industry standard 4-20mA output - compatible with virtually any control system
  • Options for HART communications and RS-485 Modbus
Easy maintenance
  • Remote non-intrusive calibration - the IR display can be mounted up to 30 metres from the IRmax and test gas can be applied without requiring direct access to the detector
  • Hand-held Intrinsically Safe (I.S) calibrator - IRmax detectors fitted with an I.S barrier module can be checked and calibrated using an I.S calibration accessory
  • STAY-CLIR optics - prevents condensation on optical components
Low cost of ownership
  • Low power - only consumes 1W of power, enabling small power supplies and battery back-up systems to be used
  • Automatic optical obscuration monitoring - minimal routine maintenance keeps costs down
  • Annual proof-test interval

 

Request
Callback
Yes! I am interested

TXgard Plus Flammable Gas Detector

TXgard Plus Flammable Gas Detector
  • TXgard Plus Flammable Gas Detector
Ask For Price

Product Details:

Display TypeDigital, Analog

We are engaged in offering TXgard Plus Flammable Gas Detector.

Specifications :-

Flexible output options
  • 4-20mA current sink or source - works with a wide selection of control panels
  • 3 wire format
  • Optional relays for alarm and fault - can be used for switching local alarms
Request
Callback
Yes! I am interested

TXgard-IS Gas Detectors

TXgard-IS Gas Detectors
  • TXgard-IS Gas Detectors
Ask For Price
TXgard-IS+

TXgard-IS+ is a Intrinsically Safe (I.S.) toxic and oxygen gas detector with local LCD display. A very wide choice of sensors are available for use in a variety of applications. TXgard-IS+ is ATEX certified for use in Zone 0,1 or 2 hazardous areas and also UL and cUL certified for use in Division 1 or 2 hazardous areas.

Non-intrusive calibration
  • Calibration can be performed locally without the need for hot work permits - minimises operational down-time
  • Local display and buttons enable calibration without opening the junction box
Flexible output options
  • 4-20mA current sink - works with a wide selection of control panels
  • 2 wire format
Rugged and reliable
  • Made from tough carbon loaded nylon
  • Ingress protection to IP65 as standard
Low cost of ownership
  • Non-intrusive one man calibration - easy to operate and maintain
  • Long life sensors - keeps interuption to on-site activity to a minimum
  • Simple parts replacement
Wide range of sensors
  • Extensive range of electrochemical sensors for toxic gases and oxygen

 

Request
Callback
Yes! I am interested

XgardIQ Gas Detector

XgardIQ Gas Detector
  • XgardIQ Gas Detector
Ask For Price
XgardIQ

The new XgardIQ, our most intelligent fixed-point gas detector, increases safety by minimising the time operators must spend hazardous areas.

This versatile transmitter and gas detector has a range of features that protect engineers and support facilities managers of oil, gas, chemical petrochemical plants to name a few.

Available fitted with a variety of flammable, toxic or oxygen gas sensors.

Easy and safe to use
  • OLED display - Bright, clear display indicates gas level and detector status even in dark locations
  • Non-intrusive calibration - Zero and calibration functions are performed via the display and keypad, without the need for a hot-work permit or any special tools (e.g. no magnetic wand required)
  • +ve Safety indicator - Confirms the detector is operating safely at a glance
  • Event log function - Stores all alarm, fault and maintenance events to provide a history of detector use
Simple installation and maintenance
  • Universal transmitter - Common transmitter for Crowcon's full range of sensor technologies
  • Hot-swap sensor modules - Sensors can easily be replaced using one hand without requiring tools or a hot-work permit
  • Auto-sense function - Automatically detects whether the control system is 4-20mA current sink or source and sets itself appropriately, eliminating the risk of being incorrectly set
  • Auto-configure function - Detects when a sensor module is plugged-in and uploads the appropriate gas type, range, units and alarm levels
Reliability
  • Smart Bump and Speedy Bump test functions - Enable sensor health and response to be verified quickly and easily using test gas. Process is automated and provides a reminder when a bump test is due
  • Calibration due warning - Reminds the user when calibration is due to ensure that sensors remain operational and accurate at all times
  • Sensor range selection - User can set the full-scale range of the sensor via the display menu according to site or specific location requirements

 

Request
Callback
Yes! I am interested
X
Looking for “Fixed Gas Detector”?


Reach Us
Sujit (Director)
TA-01, Third Floor, A Wing, Lake City Mall, Kapurbawdi Junction GB Road, Thane West, Above Mc Donalds, Kapurbawdi Naka
Thane- 400607, Maharashtra, India


Call Us

Send E-mail

Send SMS